dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com g-6 e-mail: sales@glenair.com series 79 micro-crimp section g: right angle printed circuit board connectors pcb connectors a a b b c c d d e e f f g g h h index index a a b b c c d d e e f f g g h h index index recept acles with pin cont acts, rig ht angle pcb termina tion, 790-041p how t o order sample part number 790-041p j-25p2 m p a part number shell size - insert arr. shell finish hardware option pc tail length 790-041p header receptacle with 90 pc tail pin contacts for termination to backplanes or flexible circuits see table 1 for available insert arrangements m electroless nickel general purpose applications mt nickel-ptfe 1000 hour grey? maximum corrosion protection and durability (non-refective grey) znu zinc-nickel with black chromate tactical applications (non-refective black) additional shell fnishes are listed on page c-9. n no hardware a .125 inch (3.2 mm.) b .250 inch (6.4 mm.) pc t ai l lengt h p female jackpost m aterials and finishes shell aluminum alloy contacts copper alloy, 50 microinches g old plated insulator liquid crystal polymer (lcp) emi shroud aluminum alloy interfacial seal flourosilicone rubber jackposts 300 series stainless steel tray thermoplastic encapsulant epoxy lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board termination. 790-041p connectors are free-standing (not for panel mounting) and mate to 790-025s cable plugs. contacts are permanently installed and are sealed with epoxy. shells are aluminum alloy. threaded board mounting holes and integral standofs simplify installation. emi shroud improves emi performance. fluorosilicone face seal provides watertight interface. available in 29 diferent contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. s pecifications current rating #23 5 amps, #16 13 a., #12 23 a. dielectric withstanding voltage #23 500 vac rms, #12 and #16 1800 vac rms insulation resistance 5000 megohms minimum operating temperature -65 c. to +150 c. shock 300 g. vibration 37 g. rev. 01-aug-2008
a a b b c c d d e e f f g g h h index index dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com g-7 e-mail: sales@glenair.com series 79 micro-crimp section g: right angle printed circuit board connectors pcb connectors a a b b c c d d e e f f g g h h index index table 1 contact arrangements layout contact quantity face view #23 #16 #12 a-5 5 b-2p2 2 b-9 9 c-13 13 d-15 15 d-3p3 3 d-7p2 5 2 e-11p2 9 2 e-19 19 e-7p3 4 3 f-15p2 13 2 f-23 23 f-5p5 5 g-33 33 h-10p4 6 4 h-29p7 22 7 h-36p2 34 2 h-54p2 52 2 h-5p5 5 h-66 66 j-17p4 13 4 j-25p2 23 2 j-33 33 j-7p7 7 k-27p4 23 4 k-35p2 33 2 k-43 43 k-9p9 9 l-6p6 6 cross-sectional view of 790-041p t able 2 h ardware option lcp insulator .007 (0.18) .195 (4.95) emi gasket .025 (0.64) epoxy emi cover lcp tray contact pin interfacial seal insulator epoxy .007 (0.18) .195 (4.95) emi gasket .025 (0.64) interfacial seal n no mating hardware connector is supplied with threaded holes. shell sizes h and l have #6-32 threads, other sizes have #4-40 threads. thread depth is .150" (3.8). p jackposts connector is supplied with non-removable stainless steel jackposts. shell sizes h and l have #4-40 unc thread, other sizes have #2-56 thread. insulator epoxy emi shroud pin contact shell interfacial seal lcp insulator .007 (0.18) .195 (4.95) emi gasket .025 (0.64) epoxy emi cover lcp tray contact pin interfacial seal insulator epoxy .007 (0.18) .195 (4.95) emi gasket .025 (0.64) interfacial seal rev. 01-aug-2008
dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com g-8 e-mail: sales@glenair.com series 79 micro-crimp section g: right angle printed circuit board connectors pcb connectors a a b b c c d d e e f f g g h h index index a a b b c c d d e e f f g g h h index index a max .500 (12.70) max .410 (10.41) .195 (4.95) .167 (4.95) a max b basic c max .308 (7.82) max pc tail length .020 (0.51) code a: .125 (3.18) code b: .250 (6.35) contact tail dia #23 contact .018/.022 (0.46/0.56) #16 contact .060/.064 (1.52/1.63) .540 (13.72) max b basic jackpost, #2-56 790-041p d imensions: shell sizes a-f, j, and k 790-041p d imensions: shell size g 790-041p sh ell sizes a-f, j and k shell size a max. b basic c max. in. mm. in. mm. in. mm. a .805 20.45 .565 14.35 .401 10.19 b .955 24.26 .715 18.16 .551 14.00 c 1.105 28.07 .865 21.97 .701 17.81 d 1.205 30.61 .965 24.51 .801 20.35 e 1.355 34.42 1.115 28.32 .951 24.16 f 1.505 38.23 1.265 32.13 1.101 27.96 j 1.855 47.12 1.615 41.02 1.456 36.98 k 2.255 57.28 2.015 51.18 1.860 47.24 .530 (13.46) max .485 (12.62) .195 (4.95) b basic .615 (15.62) max jackpost, #2-56 1.079 (27.41) max 1.215 (30.86) basic 1.455 (36.96) max 1.455 (36.96) max 1.215 (30.86) basic .387 (9.83) max pc tail length .020 (0.51) code a: .125 (3.18) code b: .250 (6.35) .018/.022 (0.46/0.56) .209 (5.31) rev. 01-aug-2008
a a b b c c d d e e f f g g h h index index dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com g-9 e-mail: sales@glenair.com series 79 micro-crimp section g: right angle printed circuit board connectors pcb connectors a a b b c c d d e e f f g g h h index index 790-041p d imensions: shell sizes h & l .550 (13.97) max .222 (5.64) .700 (17.78) max a max b basic c max #2-56 flat head screw a max b basic jackpost, #4-40 4-40 unc-2b x .150 (3.81) min 2 plcs pc tail length .020 (0.51) code a: .125 (3.18) code b: .250 (6.35) contact tail dia #23 contact .018/.022 (0.46/0.56) #16 contact .060/.064 (1.52/1.63) #12 contact .096/.092 (2.44/2.34) .415 (10.54) max .195 (4.95) .491 (12.47) 790-041p sh ell sizes h and l shell size a max. b basic c max. in. mm. in. mm. in. mm. h 2.185 55.50 1.800 45.72 1.450 36.83 l 2.430 61.72 2.036 51.71 1.686 42.82 rev. 01-aug-2008
|
